I experienced a similar problem: after deleting the deployment (kubectl delete deploy <name>), the pods kept "Running" and where automatically re-created after deletion (kubectl delete po <name>).

It turned out that the associated replica set was not deleted automatically for some reason, and after deleting that (kubectl delete rs <name>), it was possible to delete the pods.

Instead of trying to figure out whether it is a deployment, deamonset, statefulset... or what (in my case it was a replication controller that kept spanning new pods :) In order to determine what it was that kept spanning up the image I got all the resources with this command:

kubectl get all

Of course you could also get all resources from all namespaces:

kubectl get all --all-namespaces

or define the namespace you would like to inspect:

kubectl get all -n NAMESPACE_NAME

Once I saw that the replication controller was responsible for my trouble I deleted it:

kubectl delete replicationcontroller/CONTROLLER_NAME

if your pod has name like name-xxx-yyy, it could be controlled by a replicasets.apps named name-xxx, you should delete that replicaset first before deleting the pod

kubectl delete replicasets.apps name-xxx

Look out for stateful sets as well

kubectl get sts --all-namespaces

to delete all the stateful sets in a namespace

kubectl --namespace <yournamespace> delete sts --all

to delete them one by one

kubectl --namespace ag1 delete sts mssql1 
kubectl --namespace ag1 delete sts mssql2
kubectl --namespace ag1 delete sts mssql3

In some cases the pods will still not go away even when deleting the deployment. In that case to force delete them you can run the below command.

kubectl delete pods podname --grace-period=0 --force

When the pod is recreating automatically even after the deletion of the pod manually, then those pods have been created using the Deployment. When you create a deployment, it automatically creates ReplicaSet and Pods. Depending upon how many replicas of your pod you mentioned in the deployment script, it will create those number of pods initially. When you try to delete any pod manually, it will automatically create those pod again.

Yes, sometimes you need to delete the pods with force. But in this case force command doesn’t work.

This will provide information about all the pods,deployments, services and jobs in the namespace.

kubectl get pods,services, deployments, jobs

pods can either be created by deployments or jobs

kubectl delete job [job_name]
kubectl delete deployment [deployment_name]

If you delete the deployment or job then restart of the pods can be stopped.

Instead of removing NS you can try removing replicaSet

kubectl get rs --all-namespaces

Then delete the replicaSet

kubectl delete rs your_app_name

Many answers here tells to delete a specific k8s object, but you can delete multiple objects at once, instead of one by one:

kubectl delete deployments,jobs,services,pods --all -n <namespace>

In my case, I'm running OpenShift cluster with OLM - Operator Lifecycle Manager. OLM is the one who controls the deployment, so when I deleted the deployment, it was not sufficient to stop the pods from restarting.

Only when I deleted OLM and its subscription, the deployment, services and pods were gone.

First list all k8s objects in your namespace:

$ kubectl get all -n openshift-submariner

NAME                                       READY   STATUS    RESTARTS   AGE
pod/submariner-operator-847f545595-jwv27   1/1     Running   0          8d  
NAME                                  TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)    AGE
service/submariner-operator-metrics   ClusterIP   101.34.190.249   <none>        8383/TCP   8d
NAME                                  READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/submariner-operator   1/1     1            1           8d
NAME                                             DESIRED   CURRENT   READY   AGE
replicaset.apps/submariner-operator-847f545595   1         1         1       8d

OLM is not listed with get all, so I search for it specifically:

$ kubectl get olm -n openshift-submariner

NAME                                                      AGE
operatorgroup.operators.coreos.com/openshift-submariner   8d
NAME                                                             DISPLAY      VERSION
clusterserviceversion.operators.coreos.com/submariner-operator   Submariner   0.0.1 

Now delete all objects, including OLMs, subscriptions, deployments, replica-sets, etc:

$ kubectl delete olm,svc,rs,rc,subs,deploy,jobs,pods --all -n openshift-submariner

operatorgroup.operators.coreos.com "openshift-submariner" deleted
clusterserviceversion.operators.coreos.com "submariner-operator" deleted
deployment.extensions "submariner-operator" deleted
subscription.operators.coreos.com "submariner" deleted
service "submariner-operator-metrics" deleted
replicaset.extensions "submariner-operator-847f545595" deleted
pod "submariner-operator-847f545595-jwv27" deleted

List objects again - all gone:

$ kubectl get all -n openshift-submariner
No resources found.

$ kubectl get olm -n openshift-submariner
No resources found.

After taking an interactive tutorial I ended up with a bunch of pods, services, deployments:

me@pooh ~ > kubectl get pods,services
NAME                                       READY   STATUS    RESTARTS   AGE
pod/kubernetes-bootcamp-5c69669756-lzft5   1/1     Running   0          43s
pod/kubernetes-bootcamp-5c69669756-n947m   1/1     Running   0          43s
pod/kubernetes-bootcamp-5c69669756-s2jhl   1/1     Running   0          43s
pod/kubernetes-bootcamp-5c69669756-v8vd4   1/1     Running   0          43s

NAME                 TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
service/kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP   37s
me@pooh ~ > kubectl get deployments --all-namespaces
NAMESPACE     NAME                  DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
default       kubernetes-bootcamp   4         4         4            4           1h
docker        compose               1         1         1            1           1d
docker        compose-api           1         1         1            1           1d
kube-system   kube-dns              1         1         1            1           1d

To clean up everything, delete --all worked fine:

me@pooh ~ > kubectl delete pods,services,deployments --all
pod "kubernetes-bootcamp-5c69669756-lzft5" deleted
pod "kubernetes-bootcamp-5c69669756-n947m" deleted
pod "kubernetes-bootcamp-5c69669756-s2jhl" deleted
pod "kubernetes-bootcamp-5c69669756-v8vd4" deleted
service "kubernetes" deleted
deployment.extensions "kubernetes-bootcamp" deleted

That left me with (what I think is) an empty Kubernetes cluster:

me@pooh ~ > kubectl get pods,services,deployments
NAME                 TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
service/kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP   8m

In my case I deployed via a YAML file like kubectl apply -f deployment.yaml and the solution appears to be to delete via kubectl delete -f deployment.yaml

You can do kubectl get replicasets check for old deployment based on age or time

Delete old deployment based on time if you want to delete same current running pod of application

kubectl delete replicasets <Name of replicaset>

I also faced the issue, I have used below command to delete deployment.

kubectl delete deployments DEPLOYMENT_NAME

but still pods was recreating, So I crossed check the Replica Set by using below command

kubectl get rs

then edit the replicaset to 1 to 0

kubectl edit rs REPICASET_NAME

The root cause for the question asked was the deployment/job/replicasets spec attribute strategy->type which defines what should happen when the pod will be destroyed (either implicitly or explicitly). In my case, it was Recreate.

As per @nomad's answer, deleting the deployment/job/replicasets is the simple fix to avoid experimenting with deadly combos before messing up the cluster as a novice user.

Try the following commands to understand the behind the scene actions before jumping into debugging :

kubectl get all -A -o name
kubectl get events -A | grep <pod-name>

If you have a job that continues running, you need to search the job and delete it:

kubectl get job --all-namespaces | grep <name>

and

kubectl delete job <job-name>